Air units 3-part model series 5, 11,300 l/min

Version: Filter, self-relieving pressure regulator, lubricator (model series 0 with micro mist lubricator)
Materials: Body: die-cast zinc Z410 (model series 5: aluminium), spring hood: POM, diaphragms and seals: NBR, container: polycarbonate
Temperature range: to max. +60°C
Pressure gauge connection: G 1/4" (model series 0: G 1/8")
Own air consumption: None (model series 5: max. 0.5 l/min)
Pore width in the filter: 5 µm (model series 5: 40 µm, upon request 8 µm)
Condensate draining: semi-automatic****
Media: Compressed air, neutral gases
ATEX: II 2GD IIA/IIB/IIC T4 0°C <= Ta <= 60°C
Advantages: •automatic venting in the event of overpressure on the secondary side, •simple assembly of the single components through coupling kits within a model series and thread size, •hand wheel can be locked by pressing it down
Input pressure: 1.5 - 16 bar (with metal bowl max. 20 bar**)
Lubricator reaction limit (6 bar): 800 l/min
Oil supply: 450 cm³
Oil metering at 1000 l/min: approx. 1 - 2 drops/min
Max. condensate amount: 125 cm³
Optional: can be locked using a cylinder lock -K, can be locked using a cylinder lock with E 11 closure*** -KE11, version with protective cage -S, version with metal bowl** and inspection tube -M, automatic discharge -AM, automatic discharge closed when not pressurised (0 - 16 bar)-AMNC, electrical level monitoring -N
Advantages: •can be filled with oil while under pressure.
*standard series, please use in preference, as the regulation range is universally applicable, **Drip cap made of a metal/glass combination, metal bowl M with automatic discharge AM: 1,5 - 16 bar, ***Volkswagen lock system (Delivered without a key), ****As soon as the input pressure falls below the minimum. input pressure, the drain valve opens automatically. The semi-automatic drain valve can be prevented from opening by screwing the drain screw tight.
Catalogue page Pneumatic Atlas 8 (Page 535) Technical documentation Suitable accessories:

Filter elements for filters and filter regulators, Futura model series

Mounting material for Multifix-components

Coupling kit for connecting single components - Multifix

Spring hoods for pressure and filter regulators - Multifix

Replacement bowls for filters and filter regulators - Standard

Replacement bowls for lubricators - Standard

PTFE sealing tape, standard quality

Gaskets made of hard PVC (standard)

Loxeal thread seals

Special oils for pneumatic lubricator

All technical data are to be understood as non-binding reference values. prices given plus VAT
Click here in order to show prices with VAT included.