您好 ,  欢迎来到59598晟江工业品 登录后可利用更多便捷功能 会员中心  | 新会员注册 [退出]
  • 已选总价:¥0.00
  • 已选数量:0
所有费用均已包含增值税,不含运费。运费详情请参阅运费指导书。
产品详情与编号
序号 产品编号 名称 Weight 2 (output) P (male thread) Version 售价 订购数量
  全部
全部
全部
全部
全部
全部
   
1.0 RSV 14/RS6 100g / pc. 8 x 6 mm (CK connection) R 1/4" with hose connection ¥470.08
2.0 RSV 14/L8 90g / pc. 8 mm (push in fitting) R 1/4" with push in fitting ¥470.08
3.0 RSV 12/I12 185g / pc. G 1/2" (female thread) G 1/2" with female thread ¥744.16
4.0 RSV 14/RS8 105g / pc. 10 x 8 mm (CK connection) R 1/4" with hose connection ¥470.08
5.0 RSV 14/L4 90g / pc. 4 mm (push in fitting) R 1/4" with push in fitting ¥470.08
6.0 RSV 18/I18 60g / pc. G 1/8" (female thread) G 1/8" with female thread ¥367.84
7.0 RSV 38/I38 130g / pc. G 3/8" (female thread) G 3/8" with female thread ¥599.84
8.0 RSV 14/L6 90g / pc. 6 mm (push in fitting) R 1/4" with push in fitting ¥470.08
9.0 RSV 18/RS6 105g / pc. 8 x 6 mm (CK connection) R 1/8" with hose connection ¥375.04
10.0 RSV 14/RS4 95g / pc. 6 x 4 mm (CK connection) R 1/4" with hose connection ¥470.08
11.0 RSV 18/RS4 - 6 x 4 mm (CK connection) R 1/8" with hose connection ¥375.04
12.0 RSV 14/I14 75g / pc. G 1/4" (female thread) G 1/4" with female thread ¥456.32
注:本公司对上述参数保有最终解释权,如若变动,恕不通知。
Air conserving valves - pressure regulators with check valves

Temperature range: -10°C to max. +70°C
Operating pressure: 1 - 16 bar
Setting pressure: 1 - 8 bar
You give away air, and therefore money, if you do not reduce the return air by up to 85%:
•the working pressure is only needed in one direction, •the reset pressure set of 1 bar, for example, remains constant even with sinking input pressure , •when the primary pressure is applied on the thread side, the set pressure comes out of the connection side. If there is primary pressure from the connection side, this pressure comes out at the thread side without change due to the check valve. The pressure regulator can also be set to allow the return stroke to be uncontrolled (installation behind the valve) to, for example, control the forward stroke of a device.
Catalogue page Pneumatic Atlas 8 (Page 703) Technical documentation Suitable accessories:
  • Polyurethane hoses, external tolerance
  • Polyurethane hoses, internal tolerance
  • Polyamide hoses, standard
  • TKB tube - the "Metal Plastic" -pipelines
  • PTFE / PFA hoses
  • Polyethylene hoses
  • Polyamide coil tubes (PA 12 W), DIN 73378 / DIN 74324*
  • Cylinder ISO 15552 with magnet and adjustable end position damping - Eco-Line, Type XLE/TM
  • Cylinder ISO 15552 with magnet and adjustble end position damping, Type XL
  • tube cutter

  • All technical data are to be understood as non-binding reference values. prices given plus VAT
    Click here in order to show prices with VAT included.
    Copyright ©2012 SME Corporation All Rights Reserved
    ICP备案证书号:沪ICP备10013497号-1··上海工商
    ɽҵƷ|ٽͷ|ҵ|ܳ|DZ