Primary pressure dependent differential pressure regulator*

Materials: Body: nickel-plated brass / PBT, seal: NBR, holding claws: stainless steel, cartridge: nickel-plated ZNDC
Operating pressure: 0 - 9 bar
Setting pressure: 2 - 6 bar
Media: Compressed air, neutral gases
Function: •If the primary pressure is applied from the thread side, a reduced pressure appears at the connection side around the adjusted pressure difference. If there is primary pressure from the connection side, this pressure comes out at the thread side without change due to the check valve. The pressure regulator can also be set to allow the return stroke to be uncontrolled (installation behind the valve) to, for example, control the forward stroke of a device.
*use these connections only with air. They are not suitable for use with water or other liquids, or other gases than air. The connecting pieces should be tightened onto the stud's hexagon with a spanner
Catalogue page Pneumatic Atlas 8 (Page 61) Technical documentation Suitable accessories:

Polyurethane hoses, external tolerance

Polyamide hoses, standard

TKB tube - the "Metal Plastic" -pipelines

PTFE / PFA hoses

Polyamide coil tubes (PA 12 W), DIN 73378 / DIN 74324*

Polyurethane coil tubes, externally tolerated

Cylinder ISO 15552 with magnet and adjustable end position damping - Eco-Line, Type XLE/TM

Cylinder ISO 15552 with magnet and adjustble end position damping, Type XL

tube cutter

All technical data are to be understood as non-binding reference values. prices given plus VAT
Click here in order to show prices with VAT included.