Contact pressure gauge, vertical, Ø 100, 160 mm nickel chromium steel/brass, Class 1.0
Pressure gauge with two switch contacts (magnetic quick contacts), 1 NC, 1 NO.
Materials: housing: 1.4301,measuring system and indicator: Cu alloy (1.4404 at pressures >= 100 bar), window: polycarbonate
Connection thread: G 1/2"**
dual contact: 1. Contact opens when exceeding the setpoint values; 2. contact closes when exceeding the setpoint values (clockwise)
Class: 1.0
Temperature range: Environment: -40°C to max. +60°C, measured material: max. +80°C
Protection class: IP 54
The switch function 21 is the one most commonly used. Should this not be as per your requirements, we request you to enquire with us.
*Class 2,5, **with centring pin for profiled seal
Catalogue page Pneumatic Atlas 8 (Page 596) Technical documentation Suitable accessories:

Reducers for pressure gauge connections with pin

Siphons DIN 16282, PN 25 / 100

Pressure gauge stop cocks DIN 16261 / DIN 16262, up to PN 25

Pressure gauge shut-off valves DIN 16270, up to PN 400

Screwed-on screw connections with female thread (pressure gauge couplings)

PTFE sealing tape, standard quality

PTFE thread sealing fibre

Pressure gauge profiled seals, for internal centring using a centring pin

Loxeal thread seals

Pressure gauge couplings with sealing cones to screw onto a screw connection.

All technical data are to be understood as non-binding reference values. prices given plus VAT
Click here in order to show prices with VAT included.