您好 ,  欢迎来到59598晟江工业品 登录后可利用更多便捷功能 会员中心  | 新会员注册 [退出]
  • 已选总价:¥0.00
  • 已选数量:0
所有费用均已包含增值税,不含运费。运费详情请参阅运费指导书。
产品详情与编号
序号 产品编号 名称 Weight b [mm] a [mm] Gewinde Rp Tube Ø (inside) d [mm] Material 售价 订购数量
  全部
全部
全部
全部
全部
全部
全部
全部
   
1.0 PTI 1235 ES 210g / pc. 49 65 Rp 1/2" 35 ¥275.52
2.0 PTI 1035 CU 300g / pc. 37 52 Rp 1" 35 ¥385.20
3.0 PTI 1215 CU 80g / pc. 23 31 Rp 1/2" 15 ¥114.32
4.0 PTI 1222 ES 135g / pc. 48 54 Rp 1/2" 22 ¥208.32
5.0 PTI 1228 ES 165g / pc. 46 60 Rp 1/2" 28 ¥228.88
6.0 PTI 3422 CU 150g / pc. 29 40 Rp 3/4" 22 ¥230.16
7.0 PTI 1235 CU 220g / pc. 32 45 Rp 1/2" 35 ¥317.92
8.0 PTI 1254 ES 390g / pc. - - Rp 1/2" 54 ¥398.88
9.0 PTI 1218 ES 105g / pc. 47 49 Rp 1/2" 18 ¥191.52
10.0 PTI 3428 ES 195g / pc. 54 60 Rp 3/4" 28 ¥270.16
11.0 PTI 1242 ES 290g / pc. 54 77 Rp 1/2" 42 ¥336.24
12.0 PTI 1215 ES 95g / pc. 45 48 Rp 1/2" 15 ¥189.60
13.0 PTI 1218 CU 100g / pc. 25 33 Rp 1/2" 18 ¥194.00
14.0 PTI 1228 CU 150g / pc. 29 40 Rp 1/2" 28 ¥223.20
15.0 PTI 1242 CU 310g / pc. 36 51 Rp 1/2" 42 ¥396.40
16.0 PTI 3428 CU 180g / pc. 31 42 Rp 3/4" 28 ¥260.40
17.0 PTI 1254 CU 380g / pc. 42 56 Rp 1/2" 54 ¥460.72
18.0 PTI 1222 CU 125g / pc. 27 37 Rp 1/2" 22 ¥177.84
19.0 PTI 3422 ES 165g / pc. 50 54 Rp 3/4" 22 ¥232.80
注:本公司对上述参数保有最终解释权,如若变动,恕不通知。
T-piece with interior press end and female thread

Materials: Bodies: Copper/copper alloy, type stainless steel: 1.4404,Seals: FKM (red)
Temperature range*: -20°C to max. +200°C (according to the medium), temporary up to max. +280°C
Operating pressure: Copper/copper alloy type: 16 bar, Steel type: 40 bar (Ø 15 - 22), 25 bar (Ø 28 - 35), 16 bar (Ø 42 - 54), max. Operating pressure with technical gases (z.g. Compressed air, argon, nitrogen, carbon dioxide): 16 bar
Fields of application: Compressed air, cooling water, industrial water, heating water, heating oil systems, thermic solar systems with glycol or glycol water mixture
Advantages: •thanks to the FKM seal also suitable for oil bearing compressed air and water/glycol mixtures, •can also be pressed using the standard die set profiles M, V and SA (pressing contour M, V or SA), •use with standard EN 1057 copper tubing (Copper/copper alloy type), •Use with our stainless steel system pipe 1.4404 manufactured according to DIN EN 10312 (Stainless steel type)
Warning: Crimped fittings made of C steel are not suitable for compressed air lines due to the risk of corrosion. We therefore do not offer them.
*due to the variety of applications, the following excerpt lists the max. temperature values:
compressed air, heating oil, water (without additives): -20°C to max. +120°C
glycol-water mixture, glycol: -20°C to max. +200°C (temporary up to max. +280°C)
Catalogue page Pneumatic Atlas 8 (Page 112) Suitable accessories:
  • Copper installation tubes, rings, soft (R 220), DIN EN 1057 / DVGW
  • Copper installation tubes, lengths, hard (R 290), semi-hard (R 250), DIN EN 1057 / DVGW
  • PTFE sealing tape, standard quality
  • Loxeal thread seals
  • O-ring lifter
  • Tube cutter for aluminium, brass, copper and thin walled steel pipes
  • Deburrers for aluminium, brass, copper and thin-walled steel pipes
  • Stainless steel system pipes, DIN EN 10312
  • Electro-hydraulic pressing machines, Ø 12 to 108 mm
  • Dies for pressing machines, Ø 12 to 54 mm

  • All technical data are to be understood as non-binding reference values. prices given plus VAT
    Click here in order to show prices with VAT included.
    Copyright ©2012 SME Corporation All Rights Reserved
    ICP备案证书号:沪ICP备10013497号-1··上海工商
    ɽҵƷ|ٽͷ|ҵ|ܳ|DZ