您好 ,  欢迎来到59598晟江工业品 登录后可利用更多便捷功能 会员中心  | 新会员注册 [退出]
  • 已选总价:¥0.00
  • 已选数量:0
所有费用均已包含增值税,不含运费。运费详情请参阅运费指导书。
产品详情与编号
序号 产品编号 名称 Weight Packing unit [PCE] Tearing forces [N] Width [mm] 售价 订购数量
  全部
全部
全部
全部
全部
全部
   
1.0 C722 5.2g / pc. 50 4.005 9.5 (3/8") ¥22.08
2.0 C724 10g / pc. 25 6.675 12.7 (1/2") ¥14.08
注:本公司对上述参数保有最终解释权,如若变动,恕不通知。
Band-It scru-lokt buckles , Type 201

Band-It - assembly example:
step 1: Pull the buckle with ears to the tape end on the tape. Form clamps and place tape on tape. Pull the buckle over both tapes and bend the tape end approx. 30 mm under the buckle. When there are high loads on the clamps (e.g. for hose assembly) pull the tape twice through the buckle.
step 2: Insert tape in the clamping tool from the side, press on the cam lever and tighten the crank clamps by rotating them. The maximum tension is reached when the tape can no longer be pulled under the buckle (this is easily "fulfilled" by applying a finger).
step 3: After reaching the required tension, bend the tool slowly over the buckle. At the same time, loosen the crank by approx. a half rotation in order to prevent loss of tension and cracks in the tape. In order to crop the tape, pull the cutting lever backwards.
step 4: Hit the tape onto the buckle with the hammer and fold both buckle ears over to secure the tape end.
Application: For the manufacturing of clamps that can be retightened, in conjunction with "type 201" straps
Assembly tool: C001, C003
Assembly: As with type 201, however, the strap is not bent after tension, but rather fixed with the hexagon socket screw. In order to allow further tension, the tape should protrude approx. 100 mm from behind the loop.
Warning: Avoid injuries caused by folding the end of the loop!
Materials: rust-free stainless steel AISI 201 (1.4372)
Catalogue page Pneumatic Atlas 8 (Page 356) Catalogue page Pneumatic Atlas 8 (Page 1040) Suitable accessories:
  • Band-It prefabricated clamps, Junior 201
  • Band-It assembly tool

  • All technical data are to be understood as non-binding reference values. prices given plus VAT
    Click here in order to show prices with VAT included.
    Copyright ©2012 SME Corporation All Rights Reserved
    ICP备案证书号:沪ICP备10013497号-1··上海工商
    ɽҵƷ|ٽͷ|ҵ|ܳ|DZ