您好 ,  欢迎来到59598晟江工业品 登录后可利用更多便捷功能 会员中心  | 新会员注册 [退出]
  • 已选总价:¥0.00
  • 已选数量:0
所有费用均已包含增值税,不含运费。运费详情请参阅运费指导书。
产品详情与编号
序号 产品编号 名称 Weight Connection principle Hose Ø outside x inside [mm] Material 售价 订购数量
  全部
全部
全部
全部
全部
全部
   
1.0 SCK 800 PP 13g / pc. 1* 10 x 8 ¥87.12
2.0 SCK 800 PA 16g / pc. 1* 10 x 8 ¥29.52
3.0 SCK 1200 PP 24g / pc. 1* 14 x 12 ¥272.72
4.0 SCK 400 PA 5.1g / pc. 1* 6 x 4 ¥18.08
5.0 SCK 800 PVDF 26g / pc. 1* 10 x 8 ¥272.72
6.0 SCK 400 PFA 9.8g / pc. 2 6 x 4 ¥304.88
7.0 SCK 1200 PA 27g / pc. 1* 14 x 12 ¥172.40
8.0 SCK 800 PFA 31g / pc. 2 10 x 8 ¥487.76
9.0 SCK 600 PP 10g / pc. 1* 8 x 6 ¥66.24
10.0 SCK 1000 PA 20g / pc. 1* 12 x 10 ¥56.56
11.0 SCK 400 PP 4.4g / pc. 1* 6 x 4 ¥41.76
12.0 SCK 600 PA 12g / pc. 1* 8 x 6 ¥26.80
13.0 SCK 600 PVDF 20g / pc. 1* 8 x 6 ¥238.32
14.0 SCK 1000 PP 18g / pc. 1* 12 x 10 ¥156.88
15.0 SCK 400 PVDF 8.6g / pc. 1* 6 x 4 ¥156.00
16.0 SCK 1000 PVDF 35g / pc. 1* 12 x 10 ¥316.64
17.0 SCK 1200 PVDF 47g / pc. 1* 14 x 12 ¥426.00
18.0 SCK 600 PFA 22g / pc. 2 8 x 6 ¥484.32
注:本公司对上述参数保有最终解释权,如若变动,恕不通知。
Straight bulkhead screw connections

Materials: PA (polyamide), PP (polypropylene), PVDF (polyvinylidene fluoride), PFA (PTFE)
Field of application and general resistance to chemical attack PA: used in pneumatics as well as for water. The chemical resistance is good against petrol, diesel, heating oil and alkalis. PP: Resistant to aqueous solutions of acids, alkalis and salts, as well as a large number of organic solvents. Not suitable for concentrated oxidising acids. PVDF: Resistant to acids, salt solutions, aliphatic, aromatic and chlorinated hydrocarbons, alcohols and halogens. Conditionally suitable for ketones, esters, ethers, organic bases and alkali solutions. PFA: Resistant to almost all chemicals.
Operating temperature****: PA: up to max. +80°C, PP: up to max. +90°C, PVDF: -40°C up to max. +140°C, PFA: up to max. +250°C
PN: 10 bar (at +20°C)
Connection principle "1" for hoses (not for PTFE hoses):
PA, PP, PVDF: •the hose is pushed over the hose screw connection into the screw connection and locked using an elastic compression ring by tightening the knurled nut. •the elastic compression ring permits the same screw connection to be used multiple times. This means that the screw connection can be loosened and, using the same compression ring, re-tightened and sealed. •all threads and hose screw connections (for hose connections) are seamless.
Connection principle "2" for hoses (also for PTFE hoses):
PFA: •the hose is pushed over the hose screw connection into the screw connection and locked using a cutting sealing ring combination by tightening the knurled nut. •all threads and hose screw connections (for hose connections) are seamless.
****Please note the hoses technical load capacity.
*for PFA and PTFE hoses we recommend swapping the compression ring with a cutting and gasket combination (KL..PP), **knurled nuts and compression rings in PP, ***base material has FDA approval
Catalogue page Pneumatic Atlas 8 (Page 95) Technical documentation Suitable accessories:
  • Polyurethane hoses, external tolerance
  • Polyurethane hoses, internal tolerance
  • Polyurethane hoses, food-safe, external tolerance
  • PTFE / PFA hoses
  • Polyethylene hoses
  • knurled nuts
  • Clamping, cutting and sealing rings (gaskets)
  • tube cutter
  • PTFE sealing tape, standard quality

  • All technical data are to be understood as non-binding reference values. prices given plus VAT
    Click here in order to show prices with VAT included.
    Copyright ©2012 SME Corporation All Rights Reserved
    ICP备案证书号:沪ICP备10013497号-1··上海工商
    ɽҵƷ|ٽͷ|ҵ|ܳ|DZ