threaded fittings - general accesories
- Hydraulic adapter - Hydraulic connections
-
Distributor bars, PN 315
-
45° screw-in elbow with inch-thread (60° conical hose nipple), up to 350 bar
-
Double nipple with inch-thread (60° conical hose nipple), up to 400 bar
-
45° screw-in elbow with JIC thread, up to 310 bar
-
Angle bulkhead nipple with inch-thread (60° conical hose nipple), up to 350 bar
-
End caps with inch-thread (60° conical hose nipple), up to 575 bar
-
Screw-in elbow with inch-thread (60° conical hose nipple), up to 475 bar
-
Blind fittings for cutting ring fittings*, DIN 2353
-
T-pieces with JIC-thread, up to 310 bar
-
Closing plug for cutting ring fittings*, DIN 2353
-
Angle-ORFS-screwed connections (G-thread)
-
ORFS T screw connections
-
Straight ORFS bulkhead screw connections
-
Reducing nipple with metric thread / G-thread, to PN 315
-
Double nipple with metric thread / JIC-thread, up to 310 bar
-
Reducing nipple with R-thread / NPT-thread, up to 40 bar
-
ORFS elbow screw connections with union nuts
-
Reducing nipple with JIC-thread / NPT-thread, up to 310 bar
-
Locking screws with JIC-thread, up to 310 bar
-
Angle with JIC-thread, up to 450 bar
-
Reducing nipple with NPT-thread, up to 275 bar
-
T-pieces with inch-thread (60° conical hose nipple), up to 475 bar
-
ORFS cross screw connections
-
ORFS L screwed connections
-
90° angle screw connections with JIC thread, up to 310 bar
-
Z swivel joints (3 axis), L swivel joints (2 axis), 350 bar
-
Sleeves, reducing sockets, to 350 bar
-
Locking screws with elastomer seal (inches), up to 400 bar
-
Straight ORFS screw connections with union nut
-
45° ORFS elbow screw connections
-
Double nipple with NPT-thread / JIC-thread, up to 310 bar
-
Screw-in elbow with NPT thread, up to 275 bar
-
Straight ORFS screwed connections (metric thread)
-
Straight ORFS screw connections
-
Double nipple with G-thread / JIC-thread, up to 310 bar
-
T-screw connections with inch-thread (60° conical hose nipple), up to 400 bar
-
Screw-in elbow with JIC thread, up to 310 bar
-
High pressure elbow swivel joints, up to PN 400
-
Sleeves, reducing sockets with NPT thread, up to 345 bar
-
ORFS T screw connections
-
High pressure rotary joints, up to PN 500
-
ORFS reduction screw connections
-
End caps with JIC-thread, up to 345 bar
-
T-pieces with inch-thread (60° conical hose nipple), up to 475 bar
-
Straight screw connections with JIC thread, up to 310 bar
-
Angle with inch-thread (60° conical hose nipple), up to 400 bar
-
T-screw connections with JIC-thread, up to 310 bar
-
ORFS closing plugs
-
Straight ORFS screwed connections (G thread)
-
T-pieces (inside / outside / outside) with NPT-thread, up to 275 bar
-
90° angle with NPT thread, up to 345 bar
-
Straight ORFS screwed connections with union nut (G thread)
-
Elbow screw connections with inch-thread (60° conical hose nipple), up to 575 bar
-
End caps with NPT-thread, up to 345 bar
-
Reducing nipple with NPT thread / G-thread, to 700 bar
-
ORFS elbow screw connections
-
Double nipple with JIC thread, up to 310 bar
-
T-pieces with female thread, up to 350 bar
-
ORFS closing screw connections with union nuts
-
Locking screws with O-ring with UNF thread, up to 630 bar
-
Blind fittings with inch-thread (60° conical hose nipple), up to 575 bar
-
Straight screw connections with inch-thread (60° conical hose nipple), to 575 bar
-
Adjustable screwed connections with inch-thread (60° conical hose nipple), up to 400 bar
-
45° screw-in elbow with NPT thread, up to 275 bar
-
T-pieces with NPT female thread, up to 345 bar
-
High pressure double nipple with G thread / NPT thread, up to PN 800
-
Locking screws with NPT-thread, up to 345 bar
-
Double nipple with NPT thread, up to PN 345
-
T-pieces (outside / outside / outside) with NPT-thread, up to 345 bar
-
Angle with NPT-thread, up to 420 bar
-
Locking screws with elastomer seal (metric), up to 400 bar
-
Bulkhead nipple with inch-thread (60° conical hose nipple), up to 475 bar
-
Extensions with NPT-thread, up to 345 bar
-
Reducing nipple with JIC-thread / G-thread, up to 310 bar
-
Straight ORFS screwed connections (NPT thread)
-
T-pieces (outside / inside / inside) with NPT-thread, up to 350 bar
-
Double nipple with G-thread / NPT-thread, PN 40
-
Reducing nipple with JIC-thread, up to 310 bar
-
Hydraulic threaded reductions with cylindrical male and female thread
-
90° angle with female thread, up to 350 bar
-
Reducing nipple with G-thread / NPT-thread, up to 40 bar
- NPT adapters - screw connections
-
Extensions with NPT-thread, up to 345 bar
-
T-pieces (outside / inside / inside) with NPT-thread, up to 350 bar
-
45° screw-in elbow with NPT thread, up to 275 bar
-
Reducing nipple with tapered male thread and cylindrical female thread, PN 16/25
-
Locking screws with NPT-thread, up to 345 bar
-
Reducing nipple with JIC-thread / NPT-thread, up to 310 bar
-
T-pieces (outside / outside / outside) with NPT-thread, up to 345 bar
-
90° angle with female thread (cast), up to 25 bar
-
Reducing nipple with NPT-thread, up to 275 bar
-
Double nipple with NPT-thread / JIC-thread, up to 310 bar
-
Double nipple with R-thread / NPT-thread, PN 60
-
Reducing nipple with G-thread / NPT-thread, up to 40 bar
-
Screw connections with female thread - conically sealing, up to 25 bar
-
Screw connections with female and male thread - conically sealing, up to 25 bar
-
Double nipple with G-thread / NPT-thread, PN 40
-
High pressure double nipple with G thread / NPT thread, up to PN 800
-
T-pieces with female thread (cast), up to 25 bar
-
Screw-in elbow with NPT thread, up to 275 bar
-
90° angle with NPT thread, up to 345 bar
-
Reducing nipple with R-thread / NPT-thread, up to 40 bar
-
End caps with NPT-thread, up to 345 bar
-
Angle with NPT-thread, up to 420 bar
-
Double nipple with conical thread, PN 16/25
-
Reducing nipple with NPT thread / G-thread, to 700 bar
-
Sleeves/reducing sockets - round, PN 16
-
Sleeves, reducing sockets with NPT thread, up to 345 bar
-
Straight screwed connections, NPT thread
-
T-pieces with NPT female thread, up to 345 bar
-
End caps with female thread, PN 16/25
-
T-pieces (inside / outside / outside) with NPT-thread, up to 275 bar
-
Screw-in elbow with female and male threads (cast), up to 25 bar
-
Double nipple with NPT thread, up to PN 345
- vehicle fittings
- Angle fittings
-
Elbow screw connections with inch-thread (60° conical hose nipple), up to 575 bar
-
Bögen 45° mit Innen- und Außengewinde, PN 25
-
Screw-in elbow with female and male threads (cast), up to 25 bar
-
45° screw-in elbow with NPT thread, up to 275 bar
-
Elbow connections, PN 16
-
Elbows, 90° with female and male threads, PN 25
-
45° ORFS elbow screw connections
-
Screw-in elbow with female and male threads (forged), up to 150 bar
-
90° angle screw connections with JIC thread, up to 310 bar
-
Angle with NPT-thread, up to 420 bar
-
Angle with male thread, up to 150 bar
-
Bögen 45° mit Innengewinde, PN 25
-
90° angle with NPT thread, up to 345 bar
-
90° angle with female thread, up to 350 bar
-
45° screw-in elbow with female and male threads, up to 25 bar
-
90° angle with female thread (forged), up to 150 bar
-
45° screw-in elbow with JIC thread, up to 310 bar
-
Screw-in elbow with female and male threads made of plastic, PN 10
-
Elbows, 90° with female thread, PN 25
-
90° elbows with male thread, up to 25 bar
-
90° angle with female thread (cast), up to 25 bar
-
Angle with JIC-thread, up to 450 bar
-
Angle 45° with female thread, up to 25 bar
-
Screw-in elbow with inch-thread (60° conical hose nipple), up to 475 bar
-
Separable elbow screw connections, with female and male threads - tapered seal, up to 25 bar
-
Angle with inch-thread (60° conical hose nipple), up to 400 bar
-
45° screw-in elbow with inch-thread (60° conical hose nipple), up to 350 bar
-
Threaded angle 45° PVC-U (only for plastic thread), PN 10
-
Elbow screw connections separable, double sided with female thread - conically sealing, up to 25 bar
-
Screw-in elbow with NPT thread, up to 275 bar
-
Screw-in elbow with JIC thread, up to 310 bar
-
Angle 90° with plastic female thread, PN 10
-
Separable elbow screw connections, with female and male threads - flat sealing, up to 25 bar
-
Elbow screw connections separable, double sided with female thread - flat sealing, up to 25 bar
-
Angle bulkhead nipple with inch-thread (60° conical hose nipple), up to 350 bar
-
Threaded angle PVC-U (only for plastic thread), PN 10
- adapter, metric-imperial
- Dairy unions
-
Dairy vacuum pressure hoses with steel coils
-
Liner hose fitting (dairy thread) with safety collar, DIN 11851
-
Conveyor/cleaning hoses for food sector
-
Black threaded pipe end connectors for cone nozzles (dairy thread), DIN 11851
-
Liner hose fitting (dairy thread)
-
Slotted nuts for cone nozzles (dairy thread), DIN 11851
-
Clamps 2-piece, Dimensions according to EN 14420-3 (DIN 2817)
-
Hose thread connection (daily thread)
-
Double nipple reducing with round thread (dairy thread), DIN 11852
-
Seals for threaded end (dairy thread), DIN 11851
-
Cap nuts for threaded ends (dairy thread), DIN 11851
-
End caps for threaded ends (dairy thread), DIN 11851
-
Cone welding nozzles (dairy thread), DIN 11851 / similar to DIN 11851
-
Threaded pipe connectors (dairy thread), DIN 11851 / similar to DIN 11851
-
Hook spanner, DIN 1810 A
-
Double nipple with round thread (dairy thread), DIN 11852
-
Cone screw-in nozzles (dairy thread), DIN 11851
-
Dairy hoses
-
Thread screw-in nozzle (dairy thread), DIN 11851
-
Hose thread connection (daily thread) with safety collar, DIN 11851
- Reducing nipple
-
Reducing nipple PVC-U (only for plastic thread), PN 10
-
Reducing nipple with JIC-thread, up to 310 bar
-
Reducing nipple PVC-U short version (only for plastic thread), PN 10
-
Reducing nipple with G-thread / NPT-thread, up to 40 bar
-
Reducing nipple with JIC-thread / G-thread, up to 310 bar
-
Hydraulic threaded reductions with cylindrical male and female thread
-
Adjustable screwed connections with inch-thread (60° conical hose nipple), up to 400 bar
-
Threaded extension pieces with cylindrical male and female thread, PN 16/40
-
ORFS reduction screw connections
-
Reducing nipple with cylindrical plastic male and female thread, PN 10
-
Reducing nipple with R-thread / NPT-thread, up to 40 bar
-
Extensions with NPT-thread, up to 345 bar
-
Reducing nipple with JIC-thread / NPT-thread, up to 310 bar
-
Reducing nipple with metric thread, PN 16
-
Reducing nipple with cylindrical G-thread without collar, to PN 100
-
Adapter for nozzle assembly in aluminium blow guns
-
Reducing nipple with NPT thread / G-thread, to 700 bar
-
Reducing nipple with tapered male thread and cylindrical female thread, PN 16/25
-
Threaded plastic extension pieces, PN 10
-
Reducing nipple with NPT-thread, up to 275 bar
-
Threaded brass extension pieces with spline socket head, DIN 3523
-
Reducing nipple with cylindrical male and female thread, PN 16/40
-
Reducing nipple with metric thread / G-thread, to PN 315
- Sleeves - Bulkhead screw connections
-
Threaded sockets PVC-U (only for plastic thread), PN 10
-
Sleeves, reducing sockets with NPT thread, up to 345 bar
-
Bulkhead screw connections, PN 16/40
-
U-shaped cross fitting, PN 16
-
Sleeves, reducing sockets - round, PN 16/25
-
Sleeves, reducing sockets, to 350 bar
-
Sleeves/reducing sockets - round, PN 16
-
Sleeves, plastic, PN 10
-
Hexagonal locknut (Whitworth pipe thread)
-
Sleeves, reducing sockets - hexagonal, PN 16/40
-
Reducing sockets with inch and metric thread, PN 16
-
Bulkhead screw connections (no female thread), PN 10
-
Sleeves for welding (DIN 2986), PN 40
-
Straight screw connections with JIC thread, up to 310 bar
-
Hexagonal locknut (metric thread)
-
Straight screw connections with inch-thread (60° conical hose nipple), to 575 bar
- T-pieces - Y-pieces - Cross -pieces
-
T-screw connections with inch-thread (60° conical hose nipple), up to 400 bar
-
T-pieces (outside / outside / outside), PN 16
-
T-pieces (internal/external/internal) - (forged), to 150 bar
-
Y-pieces (inside / inside / outside), PN 16
-
T-pieces with female thread (forged), up to 150 bar
-
T-pieces with JIC-thread, up to 310 bar
-
T-pieces (outside / inside / outside), PN 16
-
T-connections, PN 16
-
T-pieces with inch-thread (60° conical hose nipple), up to 475 bar
-
T-pieces with female thread and reducing/enlarging outlet, to 25 bar
-
Air junction 2-fold, up to 25 bar
-
Air junctions, 3 way, PN 16
-
T-pieces with female thread (cast), up to 25 bar
-
T-pieces (inside / outside / outside) with NPT-thread, up to 275 bar
-
Elbow distributor with female thread, PN 25
-
T-pieces (inside/ outside / outside), PN 16
-
Threaded T-pieces PVC-U (only for plastic thread), PN 10
-
Double elbow T-pieces, PN 25
-
T-pieces with plastic female thread, PN 10
-
T-pieces (outside / inside / inside) with NPT-thread, up to 350 bar
-
T-pieces with NPT female thread, up to 345 bar
-
T-screw connections with JIC-thread, up to 310 bar
-
Crosspieces, up to 25 bar
-
T-pieces (outside / outside / outside) with NPT-thread, up to 345 bar
-
T-pieces with inch-thread (60° conical hose nipple), up to 475 bar
-
T-pieces (external/internal/internal), to 25 bar
-
T-pieces (internal/external/internal) - (cast), to 25 bar
-
T-pieces with female thread, up to 350 bar
- JIC-UNF-UN adapter - screw connections
-
Screw-in elbow with JIC thread, up to 310 bar
-
Reducing nipple with JIC-thread, up to 310 bar
-
Double nipple with JIC thread, up to 310 bar
-
Straight screwed connections, UNF / UN thread with o-ring
-
Angle with JIC-thread, up to 450 bar
-
End caps with JIC-thread, up to 345 bar
-
Reducing nipple with JIC-thread / G-thread, up to 310 bar
-
Locking screws with JIC-thread, up to 310 bar
-
T-screw connections with JIC-thread, up to 310 bar
-
90° angle screw connections with JIC thread, up to 310 bar
-
45° screw-in elbow with JIC thread, up to 310 bar
-
Reducing nipple with JIC-thread / NPT-thread, up to 310 bar
-
Locking screws with O-ring with UNF thread, up to 630 bar
-
Straight screw connections with JIC thread, up to 310 bar
-
T-pieces with JIC-thread, up to 310 bar
-
Double nipple with G-thread / JIC-thread, up to 310 bar
-
Double nipple with metric thread / JIC-thread, up to 310 bar
-
Double nipple with NPT-thread / JIC-thread, up to 310 bar
- Double nipple - Screw connections
-
Double nipple with left-hand thread, PN 16
-
Replacement seal for flat seal, separable double nipple and screw connections
-
Double nipple with metric thread / JIC-thread, up to 310 bar
-
Screw connections with welded on and outside thread - flat seal, PN 16
-
Separable elbow screw connections, with female and male threads - flat sealing, up to 25 bar
-
Double nipple with R-thread / NPT-thread, PN 60
-
Double nipple separable with male thread - conically sealing, up to 25 bar
-
Screw connections with female and male thread - flat sealing, up to 25 bar
-
Double nipple with NPT-thread / JIC-thread, up to 310 bar
-
Double nipple with cylindrical thread, PN 10
-
Screw connections with welded on and male thread - tapered seal, PN 16
-
Straight ORFS screwed connections (G thread)
-
Bulkhead nipple with inch-thread (60° conical hose nipple), up to 475 bar
-
Straight ORFS screwed connections (NPT thread)
-
Elbow screw connections separable, double sided with female thread - flat sealing, up to 25 bar
-
High pressure double nipple with G thread / NPT thread, up to PN 800
-
Double nipple with right-hand thread / left-hand thread, PN 16
-
Hose crew connection with, PN 20
-
Screw connections with female thread - flat sealing, up to 25 bar
-
Screw connections with welded on and female thread - flat seal, PN 16
-
Welding nipple similar to EN 10241/DIN 2982, to 50 bar
-
Double nipple PVC-U (only for plastic thread), PN 10
-
Screw connections with female thread - conically sealing, up to 25 bar
-
Elbow screw connections separable, double sided with female thread - conically sealing, up to 25 bar
-
Pipe nipple similar to EN 10241/DIN 2982, to 50 bar
-
Straight ORFS screwed connections (metric thread)
-
Separable elbow screw connections, with female and male threads - tapered seal, up to 25 bar
-
Pipe nipple made from polypropylene
-
Double nipple with metric thread / G-thread and metric thread, PN 16
-
Double nipple with cylindrical thread, PN 16/40
-
Double nipple with G-thread / NPT-thread, PN 40
-
Double nipple with NPT thread, up to PN 345
-
Double nipple separable with male thread - flat sealing, up to 25 bar
-
Screw connections with female and male thread - conically sealing, up to 25 bar
-
Double nipple with JIC thread, up to 310 bar
-
Double nipple with inch-thread (60° conical hose nipple), up to 400 bar
-
Double nipple with conical thread, PN 16/25
-
Screw connections with welded on - flat seal, PN 16
-
Screw connections with welded on - tapered seal, PN 16
-
Screw connections with welded on and female thread - conical seal, PN 16
-
Double nipple with G-thread / JIC-thread, up to 310 bar
- ORFS screw connections
- End caps - closing plugs
-
Closing plugs with hexagon socket without tape, PN 16/40
-
Closing plugs with exterior square and tapered thread, PN 16/25
-
Locking screws with NPT-thread, up to 345 bar
-
Blind fittings for cutting ring fittings*, DIN 2353
-
End caps with inch-thread (60° conical hose nipple), up to 575 bar
-
Locking screws with elastomer seal (inches), up to 400 bar
-
Locking screws with JIC-thread, up to 310 bar
-
Locking screws with elastomer seal (metric), up to 400 bar
-
End caps with NPT-thread, up to 345 bar
-
ORFS closing screw connections with union nuts
-
Locking screws with O-ring with UNF thread, up to 630 bar
-
Closing plugs with hexagon socket and cylindrical thread, PN 16/40
-
Closing plugs with exterior hexagonal and tape with cylindrical thread, PN 16/40
-
Blind fittings with inch-thread (60° conical hose nipple), up to 575 bar
-
Closing plugs with exterior hexagonal and cylindrical thread, PN 16/40
-
Closing plugs with exterior hexagonal and tapered thread, PN 8/16
-
Closing plug for cutting ring fittings*, DIN 2353
-
End caps with JIC-thread, up to 345 bar
-
ORFS closing plugs
-
End caps with female thread, PN 16/25
- Rotary joints - swivel joints
-
L push in fittings with cyl. threads and two ball bearings, up to 1500 rpm.
-
Ball guided elbow bulkhead rotation screw connections, cutting ring connection, PN 350
-
Ball guided bulkhead rotation screw connections, cutting ring connection, up to PN 350
-
L push in fittings with a ball bearing, up to 500 rpm.
-
Ball guided elbow swivel joints with thread, PN 315
-
Rotary joints 1-way, up to 550 rpm
-
High pressure elbow swivel joints, up to PN 400
-
Rotary joints 2-way, up to 300 rpm
-
Rotary joints 3-way, up to 200 rpm
-
Slide bearing angle swivel screw connection (metric), up to 10 rpm
-
Ball guided double swivel screw connections, cutting ring connection, 350 bar
-
High pressure rotary joints, up to PN 500
-
Universal rotary joint for rotating inside ring up to 3500 U/min, up to PN 50
-
Push in fittings with two ball bearings, up to 1500 rpm.
-
push in fittings with ball bearing, up to 500 rpm.
-
Ball bearing rotary joints, up to 420 bar
-
Straight swivel joints external female thread 360° rotation
-
Z swivel joints (3 axis), L swivel joints (2 axis), 350 bar
-
Push in fittings with cyl. threads and a ball bearing, up to 500 rpm.
-
Rotary joints with external and female threads, can be turned 360°
-
L push in fittings with two ball bearings, up to 1500 rpm.
-
Ball guided elbow swivel joints, cutting ring connection, PN 350
-
L push in fittings with cyl. threads and a ball bearing, up to 500 rpm.
-
Rotary joints with external and female threads, can be turned 360°
-
Universal rotary joints up to 3500 U/min, up to PN 50
-
Ball guided straight swivel joints, cutting ring connection, PN 350
-
Rotary distributors, can be turned 360°, 4-way, up to 300 rpm
-
Ball guided straight swivel joints with screw in thread, PN 350
-
Push in fittings with cyl. threads and two ball bearings, up to 1500 rpm.
-
Rotary distributors, 3-way or 6-way, up to 300 rpm
-
Quick swivel joints 360° rotatable, up to 1500 min-1
-
Slide bearing angle swivel screw connection (BSPP), up to 10 rpm
-
Universal rotary joint for stationary inside ring up to 3500 U/min, up to PN 50
- Threaded nozzle - Hose screw connection
-
Threaded nozzles with metric thread, PN 16
-
Threaded nozzles with cylindrical thread - internal cone, PN 10/16/40
-
Hose screw connections with twistable connecting nut, Dimensions according to DIN EN 14423 / DIN 2826
-
Threaded nozzle PVC-U (only for plastic thread), PN 10
-
T-threaded nozzle made of plastic, PN 8
-
Threaded nozzles rotatable, PN 12
-
2/3 hose screw connections, with wing union nut - flat sealing, PN 16
-
Threaded nozzles with conical thread without a collar, PN 50
-
Screw-on fittings with metric thread, PN 16
-
Screw-on hose fittings (fixed female thread), PN 16/40
-
Wing union nuts for hose screw connections, PN16 (will be discontinued)
-
Threaded nozzles rotatable, ball bearing mounted, PN 24
-
Threaded nozzles with conical thread, PN 8/16
-
Hose screw connections with connecting nut (left-hand thread), PN 16/40
-
Fixed flange, Dimensions according to DIN EN 14423 / DIN 2826
-
Connections for hose screw connections, PN 16
-
Complete screw connections with safety collars, DIN 8537/20033
-
Stand pipe fittings with male thread and wing union nut
-
Hose connectors with female threads with safety collars
-
Hose screw connections connecting nut and safety collar, Dimensions according to EN 14420-5 (DIN 2817)
-
Threaded nozzles with male thread and safety collar, Dimensions according to EN 14420-5 (DIN 2817)
-
Threaded nozzles with cylindrical thread, with NBR O-ring, PN 30
-
L threaded nozzles, PN 16
-
Threaded nozzles with cylindrical left-hand thread - internal cone, PN 16
-
Hose crew connection with, PN 20
-
Hose screw connections with connecting nut, PN 16/40
-
Banjos with hose screw connection, PN 16
-
Angle-threaded nozzles made of plastic, PN 8
-
Threaded nozzle, Dimensions according to DIN EN 14423 / DIN 2826
-
male thread fittings with safety collar
-
Union nuts for hose screw connections, PN 16/40
-
Angle threaded nozzle with inch and metric thread, PN 16
-
Connections for hose screw connections, PN 40
-
male thread hose nipple (metric) 60° internal cone, DIN 3863
- metric adapters - screw connections
-
Locking screws with elastomer seal (metric), up to 400 bar
-
Straight screwed connections (metric)
-
Bulkhead screw connections, PN 16/40
-
Closing plugs with hexagon socket without tape, PN 16/40
-
Straight screwed-on screw connections, with female thread (metric)
-
Double nipple with metric thread / JIC-thread, up to 310 bar
-
Straight reduction screw connections
-
Adapter for nozzle assembly in aluminium blow guns
-
Straight screw connections
-
Reducing nipple with metric thread, PN 16
-
Straight screwed connections, UNF / UN thread with o-ring
-
Hydraulic threaded reductions with cylindrical male and female thread
-
Reducing nipple with metric thread / G-thread, to PN 315
-
Straight screwed connections, NPT thread
-
Straight screwed-on screw connections, with female thread (BSPP)
-
Pressure gauge couplings (screwed connection for tube)
-
Straight screwed connections, Whitworth pipe thread (BSPP)
-
Double nipple with metric thread / G-thread and metric thread, PN 16
- Distributor blocks
-
Pipelines sockets distributor, PN 16
-
Pipelines sockets air junction, PN 16
-
Distributor bars with integrated ball valves, PN 10
-
Verteilerleisten aus Edelstahl, doppelseitig, PN 10
-
Verteilerleisten aus Edelstahl, einseitig, PN 10
-
Distributor bars 4-fold M5 to G 1/2", PN 16
-
Stainless steel distributor bars, one-sided, PN 15
-
T-connections, PN 16
-
Distributor bars double sided, PN 16
-
Distributor pipes with male and female thread, PN 10
-
Distributor pipes with male and female thread, PN 10
-
Pipeline sockets, PN 16
-
Stainless steel distributor bars double sided, PN 16
-
Air junctions, complete with male thread and coupling sockets NW 7.2
-
Distributor bars 8-fold M5 to G 1/2", PN 16
-
Air junctions, complete with coupling plugs and coupling sockets NW 7.2
-
Pipeline sockets / air junctions / plastic distributor, PN 10
-
Distributor bars one sided, PN 16
-
Pipeline sockets with push in fitting, PN 16
-
Distributor bars, PN 315
-
Pipeline sockets / plastic air junctions, PN 15
-
Elbow connections, PN 16
-
Distributor blocks 9-/12-fold M3 to G 1/2", PN 16
-
Cross distributor blocks, PN 16
-
Air junctions, complete with female thread and coupling sockets NW 7.2
-
Plastic distributor 5-fold for cable channel, PN 10
-
Pipeline sockets complete with coupling sockets NW 7.2
|
共459种产品
-
- （共39种产品）
- ￥41.91999816894531 ~ ￥1579.0400390625
-
- （共9种产品）
- ￥21.1200008392334 ~ ￥259.2799987792969
-
- （共2种产品）
- ￥17.440000534057617 ~ ￥19.84000015258789
-
- （共2种产品）
- ￥304.9599914550781 ~ ￥1456.3199462890625
-
- （共19种产品）
- ￥36.31999969482422 ~ ￥1069.0400390625
-
- （共5种产品）
- ￥298.55999755859375 ~ ￥1302.56005859375
-
- （共12种产品）
- ￥140.8000030517578 ~ ￥11501.2802734375
-
- （共2种产品）
- ￥179.52000427246094 ~ ￥314.55999755859375
-
- （共9种产品）
- ￥116.16000366210938 ~ ￥2552.639892578125
-
- （共1种产品）
- ￥126.80000305175781 ~ ￥126.80000305175781
-
- （共2种产品）
- ￥650.5599975585938 ~ ￥773.280029296875
-
- （共6种产品）
- ￥140.8800048828125 ~ ￥2393.919921875
-
- （共4种产品）
- ￥5.519999980926514 ~ ￥102.23999786376953
-
- （共1种产品）
- ￥9.199999809265137 ~ ￥9.199999809265137
-
- （共6种产品）
- ￥15.199999809265137 ~ ￥420.0799865722656
-
- （共37种产品）
- ￥1.2799999713897705 ~ ￥100.55999755859375
-
- （共10种产品）
- ￥84.0 ~ ￥1673.1199951171875
-
- （共7种产品）
- ￥511.6000061035156 ~ ￥718.0800170898438
-
- （共12种产品）
- ￥55.52000045776367 ~ ￥1126.3199462890625
|
