quick-push-in connectors - hose fittings
- IQS mini-push-in fittings, 3 - 6 mm, M 3 - 1/8"
-
Y push-in connectors (also reducing), mini
-
Push-in connectors (also reducing), mini
-
Push in fittings with exterior hexagon , Mini
-
X push-in connectors, Mini
-
Push in connections with plug reducing
-
Push in fittings with female thread, Mini
-
L push in fittings, short, Mini
-
TE-push in fittings, Mini
-
Push in fittings with hexagon socket , Mini
-
LE push in fittings, Mini
-
Y push-in connectors with push-in nipple (also reducing), mini
-
Elbow push-in fittings, Mini
-
Bulkhead push-in connections, Mini
-
Push in fittings with fine thread, Mini
-
Push in fittings 45°, Mini
-
tube cutter
-
L push in fittings, long, Mini
-
T push-in connectors (also reducing), mini
-
Angle bulkhead push-in connections, Mini
-
L push in connectors with plug / push in nipples, Mini
- hose screw connection, PA, PP, PVDF, PFA, 6x4 to 14x12 mm
- Hose connectors
-
Plastic T-hose connector, PN 8
-
Hose connections, short, Eco-Line/PN 16
-
Straight push in connectors for PUR, PUN and PA hoses, PN 10
-
Rotatable L-push on fittings for PU-, PUN- and PA hose
-
Angle plastic hose connector, PN 8
-
Y-push in connector for PUR, PUN and PA hose, PN 10
-
V-push in connector for PUR, PUN and PA hose, PN 10
-
Rotatable L-push-on fittings for PUR, PUN and PA hose, PN 10 (will be discontinued)
-
Rotatable T-push on fittings for PU-, PUN- and PA hose
-
Hose connector made of connector brass, PN 16
-
Universal PVDF hose connections, PN 8
-
T-hose connectors reduced from plastic, PN 8
-
Universal plastic hose connections, PN 8
-
T-push in connector for PUR, PUN and PA hose, PN 10
-
Hose connection tubes made from plastic, PN 8
-
Rotatable L-push-on fittings for PUR, PUN and PA hose, PN 10 (will be discontinued)
-
Hose connection tubes, hose connection tubes reducing, PN 16
-
Push in nipple with cylindrical thread - internal cone, PN 10
-
Laboratory hose couplings
-
Plastic Y-hose connector, PN 8
-
Tube connector-multibox with 56 connectors, PN 8
-
L push in connectors for PUR, PUN and PA hoses, PN 10
-
Cross hose connectors made of plastic, PN 8
-
Rotatable T-push-on fittings for PUR, PUN and PA hose, PN 10 (will be discontinued)
- IQS-Steckanschlüsse für Flüssigkeiten und Lebensmittel (FDA)
-
Angle push-in connectors, FDA
-
TE push-in fittings, FDA
-
L push-in fittings, FDA
-
Angle push-in connectors with push-in nipple, FDA
-
Push-in connectors, reducing with push-in nipple, FDA
-
Bulkhead push-in connectors, FDA
-
Push-in connectors, FDA
-
Push-in fittings with exterior hexagon, FDA
-
T push-in connectors, FDA
-
Plugs for locking push-in connectors, FDA
- Push in fittings made of brass and stainless steel (RIB, RIX) 4-14 mm
- IQS push-in fittings, 4 - 16 mm, M 5 - 1/2"
-
Multiple distributors with 4 outlets, standard
-
L push-in fittings with cylindrical female thread, standard
-
T multiple distributors with female threads and 3 outlets, standard
-
T push-in connectors (also reducing), standard
-
Banjo bolts for IQS banjos, standard
-
Push-in fitting screw-in sockets (R thread/metric nipple), standard
-
Bulkhead push-in connectors made from plastic, standard
-
Bulkhead push-in connectors with female threads, standard
-
Push-in fittings with cylindrical threads and round body, standard
-
Multiple distributors with push-in nipple and 4 outlets, standard
-
L push-in connectors with long push-in nipple, standard
-
LE push-in fittings with cylindrical thread, standard
-
L push-in fittings, long body with cylindrical thread, standard
-
Elbow push-in fittings, standard
-
L push-in fittings with male and female threads, standard
-
Y push-in connectors with push-in nipple (also reducing), standard
-
Multiple distributor, 2 way*, standard
-
Push-in fittings 45° with cylindrical threads, standard
-
L push-in fittings, short, standard
-
Push-in connectors (also reducing), standard
-
Push-in fittings with hexagon socket and round body, standard
-
L push-in connectors with push-in nipple (also reducing), standard
-
Y push-in fittings, standard
-
Plugs for locking push-in connectors, standard/mini
-
Y push-in fittings with female thread, standard
-
Multiple distributor with cylindrical thread, 6-fold*, standard
-
TE push-in fittings with cylindrical threads, standard
-
L push-in fittings, long, standard
-
T multiple distributor with push-in nipple and 3 outlets, standard
-
Multiple distributor, 3 way*, standard
-
X push-in connections, standard
-
Silencer with push-in nipple*, standard
-
LE push-in fittings, standard
-
L push-in fittings with cylindrical male and female threads, standard
-
L push-in fittings, long with cylindrical thread, standard
-
tube cutter
-
multi-box IQS push-in fittings
-
Push-in fitting screw-in sockets (NPT thread/imperial nipple), standard
-
TE push-in fittings, standard
-
Y push-in fittings with cylindrical threads, standard
-
Push-in nipple with hose screw connections for PVC hose, standard
-
Push-in fitting screw-in sockets (NPT thread/metric nipple), standard
-
L push-in fittings with cylindrical thread and hexagon socket, standard
-
Y elbow pivot joints*, standard
-
Push-in fittings with male and female threads, standard
-
Caps for locking tubes, standard/mini
-
T push-in fittings with female thread, standard
-
T-multiple distributor with male threads and 6 reducing outlets (will be discontinued)
-
Y push-in fittings with external hexagon, standard
-
Y push-in fittings with cylindrical male and female threads, standard
-
Multiple distributor with cylindrical thread, 2-fold*, standard
-
Push-in fittings with female thread, standard
-
X push-in connectors with 2 reduced outlets, standard
-
L push-in fittings with hexagon socket, standard
-
Multiple distributor, 6 way*, standard
-
Push-in fitting screw-in sockets (G thread/metric nipple), standard
-
Multiple distributor with cylindrical thread, 3-fold*, standard
-
L push-in fittings with external hexagon, standard
-
Step drills for cartridges (will be discontinued)
-
Multiple distributors with 3 outlets, standard
-
Push-in fittings with cylindrical threads, standard
-
X push-in connectors with 3 reduced outlets, standard
-
Y push-in connectors (also reducing), standard
-
L push-in fittings, medium length with cylindrical thread, standard
-
Angle bulkhead push-in connectors, standard
-
Push-in connectors reducing with push-in nipple, standard
-
Bulkhead push-in connectors made from nickel-plated brass, standard
-
Multiple distributor with cylindrical female thread, standard
-
L push-in fittings, long body, standard
-
T banjos*, standard
-
Push-in fittings 45°, standard
-
Y push-in fittings with cylindrical thread and external hexagon, standard
-
T multiple distributors with cylindrical female threads and 3 outlets, standard
-
L banjos*, standard
-
Push-in nipple (also reducing), standard
-
Multiple distributor, 4 way*, standard
-
L push-in fittings with cylindrical thread and external hexagon, standard
-
L push-in fittings, short with cylindrical thread, standard
-
L push-in connectors with long push-in nipple, 45°, standard
-
Multiple distributor with female thread, standard
-
T push-in connectors with plug-in nipple, standard
-
Multiple distributor with cylindrical thread, 4-fold*, standard
-
Cartridges*, Standard
-
Safety rings for push-in connector, standard
- cutting ring fittings - compression ring fittings, steel and stainless steel, DIN 2353
- Threaded nozzle - Hose screw connection
-
Threaded nozzles rotatable, ball bearing mounted, PN 24
-
Threaded nozzles with cylindrical thread - internal cone, PN 10/16/40
-
Fixed flange, Dimensions according to DIN EN 14423 / DIN 2826
-
Threaded nozzles rotatable, PN 12
-
Hose screw connections with connecting nut (left-hand thread), PN 16/40
-
Angle-threaded nozzles made of plastic, PN 8
-
Screw-on hose fittings (fixed female thread), PN 16/40
-
Threaded nozzles with cylindrical left-hand thread - internal cone, PN 16
-
Screw-on fittings with metric thread, PN 16
-
Threaded nozzle PVC-U (only for plastic thread), PN 10
-
Hose screw connections with connecting nut, PN 16/40
-
T-threaded nozzle made of plastic, PN 8
-
Union nuts for hose screw connections, PN 16/40
-
male thread hose nipple (metric) 60° internal cone, DIN 3863
-
Threaded nozzles with cylindrical thread, with NBR O-ring, PN 30
-
Hose screw connections with twistable connecting nut, Dimensions according to DIN EN 14423 / DIN 2826
-
Connections for hose screw connections, PN 40
-
Threaded nozzles with conical thread, PN 8/16
-
Threaded nozzles with metric thread, PN 16
-
Hose crew connection with, PN 20
-
Complete screw connections with safety collars, DIN 8537/20033
-
male thread fittings with safety collar
-
Stand pipe fittings with male thread and wing union nut
-
Hose connectors with female threads with safety collars
-
Banjos with hose screw connection, PN 16
-
Angle threaded nozzle with inch and metric thread, PN 16
-
Connections for hose screw connections, PN 16
-
Threaded nozzles with male thread and safety collar, Dimensions according to EN 14420-5 (DIN 2817)
-
Hose screw connections connecting nut and safety collar, Dimensions according to EN 14420-5 (DIN 2817)
-
L threaded nozzles, PN 16
-
2/3 hose screw connections, with wing union nut - flat sealing, PN 16
-
Threaded nozzle, Dimensions according to DIN EN 14423 / DIN 2826
-
Wing union nuts for hose screw connections, PN16 (will be discontinued)
-
Threaded nozzles with conical thread without a collar, PN 50
- IQS push-in fittings in stainless steel, 4 - 16 mm, M 5 - 1/2"
- crimped fittings, copper and stainless steel, 15 - 54 mm
-
T-piece with interior press end
-
Deburrers for aluminium, brass, copper and thin-walled steel pipes
-
Reducing nipple pressing from the inside and outside
-
Elbows 90°, with pressing from the inside and outside
-
Transition socket nipple, with pressing from the outside and female thread
-
Elbows 45°, with pressing from the inside and outside
-
Copper installation tubes, rings, soft (R 220), DIN EN 1057 / DVGW
-
Angle 90° with interior press end and male thread
-
Sleeves, internal compression
-
Screw connection separatable, flat seal, both sides interior press end
-
End caps with interior press end
-
Copper installation tubes, lengths, hard (R 290), semi-hard (R 250), DIN EN 1057 / DVGW
-
Slip coupling with interior press end (for repairs)
-
Angle 90° with interior press end and female thread
-
Transition socket nipple, with pressing from the outside and male thread
-
Tube cutter for aluminium, brass, copper and thin walled steel pipes
-
Elbows 45°, with pressing from the inside
-
Stainless steel system pipes, DIN EN 10312
-
Dies for pressing machines, Ø 12 to 54 mm
-
Template for marking the insertion depth on the tube
-
O-ring lifter
-
Screw connection separatable, flat seal with interior press end and female thread
-
T-piece with interior press, reducing
-
Electro-hydraulic pressing machines, Ø 12 to 108 mm
-
Transition socket nipple, with interior press end and male thread
-
T-piece with interior press end and female thread
-
Transition socket, with interior press end and female thread
-
Reducing socket with interior press end
-
Elbows 90°, with pressing from the inside
-
Replacement seals for crimped fittings type CU and type ES
- IQS push in fittings for imperial hoses
- hose screw connection, nickel-plated brass, stainless steel, aluminium, POM
- IQS functional combinations with push in fitting
-
Push in fittings with cyl. threads and two ball bearings, up to 1500 rpm.
-
push in fittings with ball bearing, up to 500 rpm.
-
3/2-way valves* with male thread
-
Check valves* with male thread and push-in fitting
-
Check valves* with push-in fitting
-
3/2-way valves* with push in fitting
-
Mini flow control silencers* - elbow, exhaust air flow controlling
-
Push in fittings with two ball bearings, up to 1500 rpm.
-
Check valves* with cylindrical male thread and push-in fitting
-
3/2-way valves* with male thread and push in fitting
-
Stop cocks* with cylindrical male thread and push in fitting
-
Stop cocks with push in fitting
-
tube cutter
-
Push in connections*, self locking
-
3/2-way valves* with cylindrical male thread and push in fitting
-
Stop cocks with male thread and push in fitting
-
Pressure regulators*
-
Push in fittings with cyl. threads and a ball bearing, up to 500 rpm.
-
Pressure gauge for pipe installation
-
Bulkhead angle stop cock with push in fitting
-
3/2-way valves* with cylindrical male thread
-
Primary pressure dependent differential pressure regulator*
-
Air conserving valves - pressure regulators with check valves
-
Check valves* with cylindrical male thread and push-in fitting
-
One-way flow controls* - straight shape, regulating exhaust air
-
Angle stop cock with push in fitting
-
L push in fittings*, self-locking
-
L push in fittings with cyl. threads and two ball bearings, up to 1500 rpm.
-
One-way flow controls* - angular shape, regulating supply air and exhaust air
-
Push in connector* with bulkhead thread, self-locking
-
Push in connectors*, self locking
-
Angle stop cock with cylindrical male thread and push in fitting
-
One-way flow controls* - angular shape with cylindrical thread, regulating the exhaust air
-
Push in fittings* with cylindrical Threads, self-locking
-
Angle stop cocks with male thread and push in fitting
-
L push in fittings with two ball bearings, up to 1500 rpm.
-
L push in fittings with a ball bearing, up to 500 rpm.
-
Bulkhead stop cock with push in fitting
-
L push in fittings with cyl. threads and a ball bearing, up to 500 rpm.
-
One-way flow controls* - angular shape, regulating supply air and exhaust air
-
One-way flow controls* - straight shape
-
L push in fittings* with cylindrical thread, self locking
-
Check valves* with male thread and push-in fitting
-
Quick swivel joints 360° rotatable, up to 1500 min-1
- Dairy unions, DIN 11851
-
Dairy hoses
-
Hook spanner, DIN 1810 A
-
Cone welding nozzles (dairy thread), DIN 11851 / similar to DIN 11851
-
Liner hose fitting (dairy thread)
-
Seals for threaded end (dairy thread), DIN 11851
-
Dairy vacuum pressure hoses with steel coils
-
Hose thread connection (daily thread)
-
Liner hose fitting (dairy thread) with safety collar, DIN 11851
-
Slotted nuts for cone nozzles (dairy thread), DIN 11851
-
Clamps 2-piece, Dimensions according to EN 14420-3 (DIN 2817)
-
End caps for threaded ends (dairy thread), DIN 11851
-
Cone screw-in nozzles (dairy thread), DIN 11851
-
Conveyor/cleaning hoses for food sector
-
Thread screw-in nozzle (dairy thread), DIN 11851
-
Black threaded pipe end connectors for cone nozzles (dairy thread), DIN 11851
-
Double nipple reducing with round thread (dairy thread), DIN 11852
-
Threaded pipe connectors (dairy thread), DIN 11851 / similar to DIN 11851
-
Cap nuts for threaded ends (dairy thread), DIN 11851
-
Hose thread connection (daily thread) with safety collar, DIN 11851
-
Double nipple with round thread (dairy thread), DIN 11852
- Big program, 15 - 32 mm, 3/8" - 1 1/2"
-
Plugs for locking push-in connectors, big
-
L push-in connectors with push-in nipple, big
-
Polyamide hoses, standard
-
tube cutter
-
Pipelines sockets air junction, PN 16
-
Caps for locking hoses, big
-
Push-in fitting screw-in sockets (G thread/metric nipple), big
-
Push-in connectors reducing with push-in nipple, big
-
L push-in fittings with cylindrical thread, big
-
Pipelines sockets distributor, PN 16
-
Push-in fittings with inside and outside hexagon, big
-
Aluminium pipes for push in connectors
-
Pipeline sockets / plastic air junctions, PN 15
-
Polyamide tubes (PA 12 H) - bar form, (DIN 73378 / DIN 74324)*
-
LE push-in fittings with cylindrical thread, big
-
T push-in connectors (also reducing), big
-
Elbow push-in fittings, big
-
Push-in connectors (also reducing), big
-
Pipeline sockets / air junctions / plastic distributor, PN 10
-
Pipeline sockets, PN 16
-
Push-in fittings with cylindrical threads, big
-
Pipeline sockets with push in fitting, PN 16
-
Safety rings for push-in connector, big
-
TE push-in fittings with cylindrical threads, big
- vehicle fittings
- GSP hoses with push in fitting program
-
Threaded nozzle push in fitting, PN 15
-
Tubes with pressure carriers made from high strength textile braiding
-
Push-in fittings with union nut, cylindrical thread in inches, 60° cone
-
Push-in fittings with union nut, metric thread, 24° cone
-
90°Push-in fittings with union nut, metric thread, 24° cone
-
Push-in fitting with male thread, metric thread, 24° cone
-
45°Push-in fittings with union nut, metric thread, 24° cone
-
Push-in fittings with male thread, cylindrical thread in inches, 60° cone
-
Push-in fittings with union nut, cylindrical thread in inches, 60° cone
-
Push-in fittings with union nut, cylindrical thread in inches, 60° cone
-
Hose connector push in fitting, PN 15
- Compression ring fittings, brass
- Flange screw joints
- PEx tube screw connections (discontinued article)
-
PEXa tubes, PN 15*
-
T-pieces 90° with female thread, PN 10/16
-
Angle 90°, PN 10/16
-
T-pieces reducing, PN 10/16
-
T-pieces 90°, PN 10/16
-
Screwed connections with female thread, PN 10/16
-
Screwed connections with external thread, PN 10/16
-
Sleeves for connecting, PN 10/16
-
Gaskets for PP screw connections
-
MS compression rings for MS screw connections or grip rings for PP screw connections
-
MS end caps with union nuts or PP end plugs, PN 10/16
-
Union nuts for MS and PP screw connections, PN 10/16
- hose screw connection for fabric hose
|
共594种产品
-
- (共2种产品)
- ¥38.79999923706055 ~ ¥53.84000015258789
-
- (共8种产品)
- ¥53.36000061035156 ~ ¥552.1599731445312
-
- (共2种产品)
- ¥17.280000686645508 ~ ¥29.200000762939453
-
- (共2种产品)
- ¥1092.9599609375 ~ ¥1768.8800048828125
-
- (共3种产品)
- ¥4.880000114440918 ~ ¥16.0
-
- (共6种产品)
- ¥56.79999923706055 ~ ¥85.83999633789062
-
- (共4种产品)
- ¥64.55999755859375 ~ ¥264.7200012207031
-
- (共14种产品)
- ¥24.079999923706055 ~ ¥74.4000015258789
-
- (共4种产品)
- ¥17.84000015258789 ~ ¥29.1200008392334
-
- (共6种产品)
- ¥511.6000061035156 ~ ¥718.0800170898438
-
- (共20种产品)
- ¥120.08000183105469 ~ ¥1812.6400146484375
-
- (共7种产品)
- ¥211.60000610351562 ~ ¥1381.280029296875
-
- (共27种产品)
- ¥95.68000030517578 ~ ¥967.1199951171875
-
- (共8种产品)
- ¥183.67999267578125 ~ ¥1805.199951171875
-
- (共8种产品)
- ¥106.95999908447266 ~ ¥1443.5999755859375
-
- (共13种产品)
- ¥8.880000114440918 ~ ¥125.19999694824219
-
- (共15种产品)
- ¥83.36000061035156 ~ ¥1177.6800537109375
-
- (共14种产品)
- ¥3.5999999046325684 ~ ¥46.08000183105469
-
- (共10种产品)
- ¥16.479999542236328 ~ ¥55.040000915527344
-
- (共65种产品)
- ¥75.76000213623047 ~ ¥4588.72021484375
|