您好 ,  欢迎来到59598晟江工业品 登录后可利用更多便捷功能 会员中心  | 新会员注册 [退出]
  • 已选总价:¥0.00
  • 已选数量:0
所有费用均已包含增值税,不含运费。运费详情请参阅运费指导书。
产品详情与编号
序号 产品编号 名称 Weight Pressure separation for two pressure ranges Sealing plates for two pressure ranges O-rings for valve assembly (three- pieces) Mounting kit (2 bolts, threaded rod and 3 o-rings) Description Used for Version 售价 订购数量
  全部
全部
全部
全部
全部
全部
全部
全部
全部
全部
   
1.0 RF 09 E2 420g / pc. RF 19-DT RF 19-01 RF 19-03 RF 19-02 End plate with two valve seats KM 09 Base plate systems ¥183.20
2.0 RF 09 E1 290g / pc. RF 19-DT RF 19-01 RF 19-03 RF 19-02 End plate with one valve seat KM 09 Base plate systems ¥154.40
3.0 RF 09 Z4 550g / pc. RF 19-DT RF 19-01 RF 19-03 RF 19-02 Intermediate plate with four valve seats KM 09 Base plate systems ¥209.60
4.0 RF 10 E2 550g / pc. RF 19-DT RF 19-01 RF 19-03 RF 19-02 End plate with two valve seats KM 10 Base plate systems ¥198.40
5.0 RF 10 E1 350g / pc. RF 19-DT RF 19-01 RF 19-03 RF 19-02 End plate with one valve seat KM 10 Base plate systems ¥162.40
6.0 RF 10 Z4 750g / pc. RF 19-DT RF 19-01 RF 19-03 RF 19-02 Intermediate plate with four valve seats KM 10 Base plate systems ¥248.00
7.0 RF 10 Z1 195g / pc. RF 19-DT RF 19-01 RF 19-03 RF 19-02 Intermediate plate with a valve seat KM 10 Base plate systems ¥132.00
注:本公司对上述参数保有最终解释权,如若变动,恕不通知。
Base plate systems, for KM valve series

Version: Modular valve base plate system for mixed assembly of valves from the model series KM 09 and KM 10 in switching function 5/2 and 5/3-way. The number of stations is arbitrary. For large numbers of stations the supply and exhaust air supply should be borne in mind. Subsequent expansion or reduction is possible at any time. The valves mounted in the RF 19 system can also be used as single valves since all the connections are threaded. For base plate assembly the pressure connection 1 and the vents 3 and 5 are common for all valves on the front of the connection plates (G 3/8").
Feeding two different supply pressures is also possible. In that case the O-ring is extended by a sealing plate (RF 19-01). Should they be separated at a point, where no point of separation is available, the pressure separation (RF 19-DT) should be assembled. The different pressures are fed from different sides.
Assembly: When screwing in, the threaded rod comes into contact with the inclined surface of the bolt. As a result, the plates are pulled together, the O-rings seal the point of separation. If two points of separation with O-rings come into contact with each other, the sealing function is already in place. On disassembling, all the components can be reused.
Scope of delivery: All single discs are delivered complete with seals, valve fixations and assembly bolts, a separate order is not necessary.
Catalogue page Pneumatic Atlas 8 (Page 677)
All technical data are to be understood as non-binding reference values. prices given plus VAT
Click here in order to show prices with VAT included.
Copyright ©2012 SME Corporation All Rights Reserved
ICP备案证书号:沪ICP备10013497号-1··上海工商
ɽҵƷ|ٽͷ|ҵ|ܳ|DZ