您好 ,  欢迎来到59598晟江工业品 登录后可利用更多便捷功能 会员中心  | 新会员注册 [退出]
Pneumatic pinch valves with flanges DIN 2632 (idle position open), PN 6
  • 已选总价:¥0.00
  • 已选数量:0
所有费用均已包含增值税,不含运费。运费详情请参阅运费指导书。
产品详情与编号
序号 产品编号 名称 Weight Replacement sleeve natural rubber abrasion-resistant Max. PN [bar] L [mm] A DA [mm] PN**** [bar] DN [mm] Version Material 售价 订购数量
  全部
全部
全部
全部
全部
全部
全部
全部
全部
全部
全部
全部
   
1.0 QVFL 100 EP - QVM 40 AB REP 6 281 G 1/4" 220 16 100 Sleeve made of EPDM ¥8722.88
2.0 QVFL 65 B - - 6 183 G 1/4" 185 16 65 Flange made of aluminium. sleeve of NBR ¥3993.28
3.0 QVFL 100 AB - QVM 40 AB REP 6 281 G 1/4" 220 16 100 Sleeve made of natural rubber (abrasion-resistant) ¥6734.16
4.0 QVFL 50 AB 4.1kg / pc. - 6 183 G 1/4" 165 16 50 Sleeve made of natural rubber (abrasion-resistant) ¥4412.16
5.0 QVFL 100 B - QVM 40 AB REP 6 281 G 1/4" 220 16 100 Flange made of aluminium. sleeve of NBR ¥6449.44
6.0 QVFL 125 B - - 6 350 G 1/4" 250 16 125 Flange made of aluminium. sleeve of NBR ¥8603.84
7.0 QVFL 40 AB 3kg / pc. - 6 155 G 1/4" 150 16 40 Sleeve made of natural rubber (abrasion-resistant) ¥3429.52
8.0 QVFL 80 B 6kg / pc. - 6 228 G 1/4" 200 16 80 Flange made of aluminium. sleeve of NBR ¥5111.20
9.0 QVFL 250 *** - - 2 610 G 1/2" 395 10 250 Standard ¥88396.80
10.0 QVFL 50 EP * 4kg / pc. - 6 183 G 1/4" 165 16 50 Sleeve made of EPDM ¥6093.28
11.0 QVFL 150-EP - - 6 420 G 1/4" 285 16 150 Sleeve made of EPDM ¥22427.36
注:本公司对上述参数保有最终解释权,如若变动,恕不通知。
Pneumatic pinch valves with flanges DIN 2632 (idle position open), PN 6

Field of application: Pneumatic pinch valves are the fitting solution for the shut-off, regulation and dosing of abrasive, corrosive and fibrous products. They are ideally suited for use with these products due to their completely free product flow, whereby a practical blocking and dead space-free fitting results. The pneumatic pinch valves ensure an optimal shut-off, also when used with solids, such as granules, powders, pellets, chipping, sand, cement, gravel, textile fibres, carbon, fine glass fragments and liquids that contain solids.
Advantages: •Completely free flow, •No clogging by media, •Minimum frictional resistance, •Quick opening and closing, •Low energy consumption
Materials: Housing: Aluminium, flange: Cast aluminium with bushing of 1.4404 (parts in contact with media from 1.4404), sleeve: natural rubber, food safe quality
Operating pressure: max. 6 bar (DN 200 max. 4 bar, DN 250 max. 2 bar)
Control pressure: max. 1,5 to 2 bar higher than the medium's pressure
Temperature range: -10°C to max. +80°C
Optional: Natural rubber sleeve, abrasion resistant (-10°C to max. +80°C) -AB, EPDM sleeve (-10°C to max. +90°C)* -EP, aluminium flange and NBR sleeve (economical version) -B
*DN 40 - DN 50: -10°C to max. +120°C, **Please enter the required material: LE = natural rubber, food quality, AB = natural rubber, abrasion proof, EP = EPDM, ***steel housing and flange, ****pressure level flange, operating pressure deviation
Catalogue page Pneumatic Atlas 8 (Page 466) Technical documentation Suitable accessories:
  • Welding neck flange DIN 2633, PN 16
  • Thread washers DIN 2566, PN 16
  • Welding flared disks DIN 2642 for loose flanges, PN 10
  • Loose flanges DIN 2642 for pre-welding flared discs, PN 10
  • Flange seals DVGW & BAM tested, TA air certified, recommended by KTW
  • Elastomer compensators (compact), PN 10
  • Elastomer compensators, PN 10/16
  • Compensators, stainless steel, PN 10/16
  • 3/2-way micro modular solenoid valves
  • 3/2-way solenoid valves with spring return G 1/4", SF4000 model series

  • All technical data are to be understood as non-binding reference values. prices given plus VAT
    Click here in order to show prices with VAT included.
    Copyright ©2012 SME Corporation All Rights Reserved
    ICP备案证书号:沪ICP备10013497号-1··上海工商
    ɽҵƷ|ٽͷ|ҵ|ܳ|DZ